Covered by COSHHGenerated by the work
Softwood dust
You searched “sawdust” · also known as sawdust
A COSHH assessment normally covers this.
- There is an approved workplace exposure limit for it, shown below.
- It is generated by the work rather than bought in a tin, so there is no supplier label — the control is the job method.
Workplace exposure limitEH40/2005 Table 1
| Substance / fraction | 8-hour TWA | 15-minute STEL |
|---|---|---|
| inhalable fraction | 5 mg/m³ | — |
- Sen — can cause sensitisation — once someone reacts to it, they usually react to it for good
Mixed with hardwood dust, the hardwood limit (3 mg/m³) applies to all the wood dust present.
Sawing and sanding pine and other softwoods — ordinary site sawdust. A sensitiser, with the hardwood limit taking over the moment hardwood is in the mix.
- EH40/2005 Workplace exposure limits, Fourth Edition 2020, Table 1 (HSE)
In HubTrack this substance drops straight into a COSHH assessment for the job, with the exposure limit carried through and the controls that answer it.
Register your interestEmail me this card
Your searches are not stored. The printed sheet carries the sources, their versions and today's date.








